Removing Dryer Lint From the Exhaust Area

10/24/2018 (Permalink)

If you recently noticed a lot of lint buildup in the dryer at your Lakewood,NY, home, the risk of a lint fire might have crossed your mind. It can be especially hazardous for lint to build up in the dryer’s exhaust area. Here are five steps to take if you want to rid your appliance’s exhaust section from lint and avoid a dryer fire.

1. Clean the Lint Filter

Before you do anything else, make sure to clean off the dryer’s lint filter. You will also want to do this every time you are about to run the machine. You can usually remove this lint with your hand, but you can also run the filter under water.

2. Unplug Your Dryer

Before you do any further work to prevent a lint fire, make sure the dryer equipment is unplugged. Forgetting to do so could cause a dangerous accident.

3. Access Exhaust Area

Take off the panel at the back of the dryer and remove the hose at the machine’s exhaust area. You can then reach the inside of your dryer and the exhaust section to clean out lint.

4. Clean Dryer Interior

Your next task is to clean the interior of the machine and the exhaust area. A cloth and a vacuum are the best tools to use.

5. Repeat Steps Yearly

To avoid an accident that leads to fire damage, you generally need to keep your dryer as lint-free as possible. Repeat the four steps above every six months.

Lint fire prevention can seem very challenging, but the five steps above should really help you to be prepared. As long as you remember to keep checking for lint and getting rid of it when you do find it, you will be in a better position to keep your Lakewood,NY, home free of dryer fires.