Don’t Wait To Replace Your Old, Leaky Toilet
6/25/2018 (Permalink)
Of all the upgrades you can make to your Jamestown, NY, home, replacing your toilet is probably not at the top of your list. However, if you’ve got a leaking toilet, this is not a project you can afford to put off. Sometimes the toilet repair is as simple as tightening loose bolts or replacing a water-supply tube, but in many cases a total replacement is necessary. Once you’ve determined the source of your leak and decided it’s time for a new toilet, follow these five steps to replace it.
1. Choose a replacement. Make the process as seamless as possible by having a brand new toilet purchased and ready to go before you get rid of the old one.
2. Dry out the leaking toilet. Turn off the water supply using the shutoff valve on the wall behind the toilet. Then clear the remaining water by giving it a flush. Make sure that the tank is completely empty by removing the lid and soaking up any remaining moisture.
3. Remove the old toilet. Disconnect the water-supply tube and detach the toilet from the floor by unscrewing the bolts. Lift the toilet by the bowl, gently rocking back and forth to break it loose from the floor seal. Once it’s free, place the toilet into an open garbage bag to prevent dripping as you haul it outside for disposal.
4. Prepare the surface. Plug the open floor drain with an old towel while you scrape off any remnants of wax or putty from the drain opening.
5. Install your new toilet. Follow the manufacturer’s installation instructions carefully in order to avoid needing another toilet repair in the future.
Swapping out your old toilet may be simple, but if the underlying problem has been going on for a long time, you may have more extensive water damage than you realize. Contacting a restoration expert in Jamestown, NY, is the best way to ensure that you’re not dealing with the effects of a leaking toilet years down the road.
For more on Jamestown click here.